Altos R520 Installation Configuration Guide
32
2.
Please insert the EasyBUILD into the optical drive
3.
Expand Drivers -> Altos R520 -> Chipset, select Windows Server 2003 x64
and click on Setup.
4.
Follow the instruction to install the driver and reboot the server after the
chipset driver is installed.
Gigabit Ethernet Driver Installation
1.
There are two Ethernet Controller listed under Other device in Windows
Device Manager. It should be the onboard Intel 82563EB Gigabit Ethernet
controller. You could find the driver in EasyBUILD. Please do the same on
both of the devices.
2.
Right-click on the Ethernet Controller and select Update Driver.
3.
Select No, not this time. Do not connect to Windows Update to search the
driver.
4.
Select Install from a list or specific location (Advanced).
5.
Select Search the best driver these locations and check Include this
location in the search.
6.
Click on Browse and specify the path for the driver.
7.
Click on Next and follow the instruction to finish the driver update.
8.
After installing the driver, you would see Intel(R) PRO/1000 EB Network
Connection with I/O Acceleration listed in Network adapters.
