37 Altos R520 Installation Configuration Guide
IOAT Driver Installation
1.
For Base System Device, it should be the onboard IOAT device. You could
find the driver in EasyBUILD.
2.
Right-click on the Base System Device and select Update Driver.
3.
Select No, not this time. Do not connect to Windows Update to search the
driver.
4.
Select Install from a list or specific location (Advanced).
5.
Select Search the best driver these locations and check Include this
location in the search.
6.
Click on Browse and specify the path for the driver.
7.
Click on Next and follow the instruction to finish the driver update.
8.
After installing the driver, you would see Intel(R) 5000 Series Chipsets
Integrated Device – 1A38 listed in System devices.
Hot-swap Backplane Driver Installation
1.
There is an ESG-SHV SCA HSBP M11.... SCSI Enclosure Device listed under
Other device in Windows Device Manager. It is the hot-swap SAS
backplane for R520.
2.
Right-click on the ESG-SHV SCA HSBP M11.... SCSI Enclosure Device and
select Update Driver.
3.
Select No, not this time. Do not connect to Windows Update to search the
driver.
4.
Select Install from a list or specific location (Advanced).
5.
Select Search the best driver these locations and check Include this
location in the search.
6.
Click on Browse and specify the path for the driver.
7.
Click on Next and follow the instruction to finish the driver update.
8.
After installing the driver, you would see Intel (r) SCA Hotswap Backplane
listed in System devices.
VGA Driver Installation
1.
Windows will treat onboard VGA as Standard VGA device. You can find
the ATI ES1000 driver in EasyBUILD. Please insert the EasyBUILD into the
optical drive.
2.
Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000, select
Windows Server 2003 x64 and click on Setup.
3.
Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
