Altos R520 Installation Configuration Guide
56
IOAT Driver Installation
1.
For Base System Device, it should be the onboard IOAT device. You could
find the driver in EasyBUILD.
2.
Right-click on the Base System Device and select Update Driver.
3.
Select No, not this time. Do not connect to Windows Update to search the
driver.
4.
Select Install from a list or specific location (Advanced).
5.
Select Search the best driver these locations and check Include this
location in the search.
6.
Click on Browse and specify the path for the driver.
7.
Click on Next and follow the instruction to finish the driver update.
8.
After installing the driver, you would see Intel(R) 5000 Series Chipsets
Integrated Device – 1A38 listed in System devices.
VGA Driver Installation
1.
Windows will treat onboard VGA as Standard VGA device. You can find
the ATI ES1000 driver in EasyBUILD. Please insert the EasyBUILD into the
optical drive.
2.
Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000, select
Windows Server 2003 and click on Setup.
3.
Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
4.
After installing the driver, you would see ATI ES1000 listed in Display
adapters.
Microsoft Scalable Networking Pack Installation
You can find the Microsoft Scalable Networking Pack for Windows Server 2003
in the Microsoft website:
http://www.microsoft.com/downloads/details.aspx?FamilyID=c65f4a89-f4da-
463e-a496-4b5abd660bf9&DisplayLang=en
1.
Download the SNP from Microsoft website.
2.
Double-click on the downloaded file to run the installation program.
3.
Follow the instruction to install the SNP and reboot the server after the
SNP is installed.
RAID Utility Installation
1.
Please insert the EasyBUILD into the optical drive.
2.
Expand Utilities -> Altos R520 -> Integrated SAS SW RAID, select RAID
Web Console 2 (Windows) and click on Setup.
