Altos R520 Installation Configuration Guide
70
2.
Right-click on the Base System Device and select Properties.
3.
Select Driver tab and click on Update Driver.
4.
Follow the instructions. Select Search for a suitable driver for my device
(Recommended) and click on Next.
5.
Check on the Specify a location and click on Next to specify the path for
the driver.
6.
Follow the instruction to finish the driver update.
7.
After installing the driver, you would see Intel(R) 5000 Series Chipsets
Integrated Device – 1A38 listed in System devices.
VGA Driver Installation
1.
There is a VGA controller (VGA Compatible) listed under Other devices in
Windows Device Manager. It is the ATI ES1000 for R520.
2.
Insert the EasyBUILD into the optical drive.
3.
Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000 and
double-click on Windows 2000.
4.
Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
5.
After installing the driver, you would see ATI ES1000 listed in Display
adapters.
RAID Utility Installation
1.
Please insert the EasyBUILD into the optical drive.
2.
Expand Utilities -> Altos R520 -> Integrated SAS SW RAID, select RAID
Web Console 2 (Windows) and click on Setup.
3.
Follow the instruction and use the default setting to complete the RAID
Utility Installation.
Network Utility Installation
1.
Please insert the EasyBUILD into the optical drive.
2.
Expand Utilities -> Altos R520 -> Intel Gigabit Ethernet Controller/Intel
PRO/1000 Network Adapter, select PROSet Utility (Windows 2000) and
click on Setup.
3.
Follow the instruction and use the default setting to complete the
Network Utility Installation.
Windows 2000 Advanced Server SP4 Installation (with onboard
SATA RAID)
Below information describes how to manually install Microsoft Windows 2000
