background image

EN-7

CONNECTING  THE  POWER  CORD

·

Check first to make sure that the power cord you use is the correct type
required for your area.

·

This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240 V AC voltage area. No user-adjustment is required.

·

Plug one end of the power cord to the AC Inlet, plug another end to a
proper AC outlet.

·

For unit using at 120 V AC:
Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.

·

For unit using at 220/240 V AC (outside of U.S.):
Use a Cord Set consisting of H05VV-F cord and plug rated 10 A, 250 V. The
cord set should have the appropriate safety approvals for the country in
which the equipment will be installed.

SAFETY  PRECAUTION

·

Avoid placing the monitor, or any other heavy object, on the power cord
to avoid damage to the cable.

·

Do not expose the monitor to rain, excessive moisture, or dust.

·

Do not cover the ventilation slots or openings of the monitor. Always
put the monitor in a place where there is adequate ventilation.

·

Avoid placing the monitor against a bright background or where sun-
light or other light sources may reflect on the face of the monitor. Place
the monitor just below eye level.

·

Handle with care when transporting the monitor.

·

Refrain from giving shock or scratch to the screen, as screen is fragile.

CLEANING  YOUR  MONITOR

Please carefully follow the below guidelines when cleaning the monitor.

·

Always unplug the monitor before cleaning.

·

Use a soft cloth to wipe the screen and cabinet front and sides.

Summary of Contents for P206H
























Reviews: