Quick Start
INSTALLATION
Connecting to a Computer
1. Ensure the projector and your
computer are turned off.
2. Connect one end of the VGA cable
to the "VGA In" connector on the
projector; connect the other end to
the VGA connector on the
computer and tighten the screws.
3. Connect one end of the power
cord into the AC power socket on
the projector; connect the other
end to an electrical outlet.
Powering On the Projector
INTERFACE CONNECTOR
Powering On the Projector
1. Remove the lens cap.
2. Turn on the projector first and then
the computer.
3. Adjust the position, focus and zoom.
4. Run you presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remote AC power cord from
outlet until the projector fan shut
down.
English
S-Video Output
Video Output
8
4
2 9
1
3
5
7
6
RS232
DVI
RGB
USB
DVD Player,
Settop Box,
HDTV receiver
1. Power Cord
2. VGA Cable
3. Composite Video Cable
4. USB Cable
5. VGA to Component/HDTV Adapter
6. S-Video Cable
7. Audio Cable Jack/Jack
8. RS232 Cable (Optional Accessory)
9. DVI Cable (Optional Accessory)
