English...30
Problem: The image is shrunk when displaying 4:3 DVD.
The projector automatically detects 4:3 DVD and adjusts the aspect
ratio by digitizing to full screen with 16:9 default setting.
If the image is still shrunk, you will also need to adjust the aspect
ratio by referring to the following:
Please select 16:9 aspect ratio type on your DVD player if you are
playing a 4:3 DVD.
If you can’t select 16:9 aspect ratio type on your DVD player, please
select 16:9 aspect ratio on screen menu.
Problem: Image is reversed.
Select “Management” from the OSD and adjust the projection
direction. See page 24.
Problem: Lamp burns out or makes a popping sound.
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will
not turn on until the lamp module has been replaced. To replace
the lamp, follow the procedures in the “Replacing the Lamp”.
See page 32.
Problem: LED lighting message.
Appendices
Message
Standby State
(Input power cord)
Lamp lighting
Power on
Power off (Cooling)
Error (Lamp fail)
Error (Thermal fail)
Error (Fan lock fail)
Error (Over Temp.)
Error
Temp LED
Flashing
Lamp LED
(Lamp Breakdown)
=>Light On
=>Light Off
Power LED
Blue
Flashing
Flashing
Flashing
Flashing
Flashing