105 Altos R5250 Installation Configuration Guide
10.
Click on Details, change the Filter from Patterns to Package Groups.
11.
Select the Source under Development in left window and check kernel-
source in the right window to add the kernel source.
12.
Click on Accept and continue the installation.
13.
Follow the instruction to complete the installation.
14.
If you have installed the ATI FireGL V5200 in the system, the system
CANNOT boot into X-window after OS installation completed. You need
reboot the system into text and install the driver for ATI FireGL V5200 first.
Please refer to VGA driver installation (ATI FireGL V5200) section for how
to install the driver.
VGA Driver Installation (onboard XGI Z9s)
1.
You can find the onboard XGI Z9s VGA driver in EasyBUILD 8.0 build 100.
Please refer to Directory on EasyBUILD in Driver Required section and
copy the driver from the EasyBUILD 8.0 build 100 to HDD first.
# mount /media/cdrom
# cp /media/cdrom/Disk/r5250/onboard/xgiz9s/sles10/
xgi_xg27_x86_xorg7_1_12_03.run /tmp
2.
Install the driver
# cd /tmp/
# ./
xgi_xg27_x86_xorg7_1_12_03.run
VGA Driver Installation (ATI FireGL V5200)
NOTE. With ATI FireGL V5200 installed, the system CANNOT boot into X-
window after the SLES 10 installation completed. You need to reboot the
system into text mode and install the driver for ATI FireGL V5200 first.
NOTE. For installing the ATI FireGL V5200 driver, additional packages are
required. Please refer to the Installation Tips section for which packages should
be installed.
1.
When the system stopped after OS installation completed, please power
off the system than power on it again.
NOTE: To install the ATI FireGL V5200 driver on SUSE Linux Enterprise
Server, you are required to modify the command line "maxcpu" to “8” at
the bottom of the boot select menu.
2.
At the bottom of boot select menu, modify the command line "maxcpu"
value to “8” (ie. maxcpu=8).
ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=8 edd=0ff 3
3.
Please select SUSE Linux Enterprise Server 10 (Failsafe) at boot select
menu.
