Altos R5250 Installation Configuration Guide
118
Initial RAID Volume
1.
Select Initialize from Management menu. All logical drives should be
listed under Logical Drives.
2.
Press Spacebar to select drives for initialization. The selected drive will be
shown in yellow.
3.
After selecting the drives, press F10 and select YES to start the
initialization process.
4.
When initialization is complete, press ESC to continue.
5.
Press ESC to return to the Management Menu.
Assigning a Hot Spare Disk
1.
Select Objects from Management menu.
2.
Select Physical Drive from Objects. All of the HDDs will be listed.
3.
Select a drive marked as READY and press Enter.
4.
Select Make Hot Spare and press Enter.
5.
Select Yes then you will see the HDD is changed from READY to HOTSP.
6.
Press ESC to return to the Management Menu.
Save and Exit Embedded RAID Configuration Utility
1.
When RAID configuration, initialization and assigning hot spare is
completed, press ESC in the Management Menu and select YES to exit the
RAID Configuration Utility.
2.
Press Ctrl + Alt + Del to reboot the server.
3.
Now you can start to install OS.
