Altos R5250 Installation Configuration Guide
14
5.
Please hold the ctrl key to select all of listed driver and click on Next to
load the driver.
6.
After the driver is loaded and returned to “Where do you want to install
Windows?” page, click on Next to continue the installation.
7.
Follow the instructions to finish the installation.
Chipset Driver Installation
Please refer to the Windows Server 2008 Enterprise x64 Edition (SAS Daughter
Board) Chipset Driver Installation section.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver will be installed automatically when you installing the
chipset driver package.
VGA Driver Installation (onboard VGA)
Please refer to the Windows Server 2008 Enterprise x64 Edition (SAS Daughter
Board) XGI Z9s Driver Installation section.
VGA Driver Installation (ATI FireGL V5600)
Please refer to the Windows Server 2008 Enterprise x64 Edition (SAS Daughter
Board) ATI FireGL V5600 Driver Installation section.
RAID Utility Installation
The onboard SATA RAID utility is included in the chipset driver package. The
onboard SATA RAID utility will be installed automatically when you installing
the chipset driver package.
Network Utility Installation
The ForceWare Network Access Manager is included in the chipset driver
package. The ForceWare Network Access Manager will be installed
automatically when you installing the chipset driver package.
Windows Server 2008 Enterprise x64 Edition Installation (with
LSI MegaRAID SAS 8204ELP)
Below information describes how to manually install Windows Server 2008
Enterprise x64 Edition on Altos R5250 with LSI MegaRAID SAS 8204ELP.
BIOS Required
Altos R5250 BIOS
P06
(or later) is required to support Windows Server 2008.
Drivers Required
For Windows 2008 x64 Installation, the following device drivers are required.
Device
Version
Directory on EasyBUILD
