49 Altos R5250 Installation Configuration Guide
9.
Please right-click on desktop and select Properties.
10.
Select Setting tab, Change the setting of Display to 1. Plug and Play
Monitor and ATI FireGL V5200 and click on Advanced.
11.
Select Troubleshoot tab, change the setting of the Hardware acceleration
to Full and apply the setting. You will not see the message again.
12.
Checking the Device Manager, you would see ATI FireGL V5200 and ATI
FireGL V5200 Secondary listed in Display adapters in Device Manager.
RAID Utility Installation
1.
For installing the MegaRAID Storage Manager for the SAS daughter
board, please insert the EasyBUILD 8.0 build 100 (or later) into the optical
drive.
2.
Expand Utilities -> Altos R5250 -> SAS Daughter Board, select MegaRAID
Storage Manger (Windows 2000) and click on Setup.
3.
Follow the instruction, accept the license agreement and use the default
setting to the Setup Type.
4.
At Setup Type, please select StandAlone.
5.
Follow the instruction again to complete the installation.
Network Utility Installation
NOTE. ForceWare Network Access Manager only supports Microsoft Internet
Explorer version 6.0 or later. If you want to use the ForceWare Network Access
Manager with Windows 2000, you need to update the Microsoft Internet
Explorer to version 6.0 or later.
The ForceWare Network Access Manager is included in the chipset driver
package. The ForceWare Network Access Manager will be installed
automatically when you installing the chipset driver package.
Windows 2000 Advanced Server SP4 Installation (SAS RAID
daughter board with i-Button)
Below information describes how to manually install Windows 2000 Advanced
Server SP4 on Altos R5250 SAS RAID daughter board with i-Button.
Drivers Required
For Windows 2000 Installation, the following device drivers are required.
