Altos R5250 Installation Configuration Guide
56
Windows?” page, click on Next to continue the installation.
7.
Follow the instructions to finish the installation.
Chipset Driver Installation
1.
Please insert the EasyBUILD 8.0 build 100 (or later) into the optical drive
2.
Expand Drivers -> Altos R5250 -> Chipset and double-click on Windows
Vista x64.
3.
Follow the instruction and use the default setting to install all of the
drivers and utilities in the driver package.
4.
After all drivers and utilities are installed, please reboot the system.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver would be installed automatically when you installing
the chipset driver package.
RAID Utility Installation
1.
For installing the MegaRAID Storage Manager for the SAS daughter
board, please insert the EasyBUILD 8.0 build 100 (or later) into the optical
drive.
2.
Expand Utilities -> Altos R5250 -> SAS DAUGHTER BOARD, select
MegaRAID Storage Manger (Windows Vista x64) and click on Setup.
3.
Follow the instruction, accept the license agreement and use the default
setting to the Setup Type.
4.
At Setup Type, please select StandAlone.
5.
Follow the instruction again to complete the installation.
Windows Vista Enterprise x64 Edition Installation (SAS RAID
Daughter Board)
Below information describes how to manually install Windows Vista Enterprise
x64 Edition on Altos R5250 SAS RAID daughter board installed.
Drivers Required
For Windows Vista x64 Installation, the following device drivers are required.
Device Version
Directory on EasyBUILD
SAS RAID Daughter
Board
09.25.1029.20
07
\Disk\r5250\raid\sas1068\x64\vista\
Onboard NVIDIA
NFP3600 Chipset
Package 1502
\Disk\R5250\onboard\Chipset\x64\vista\
Onboard NVIDIA
nForce Networking
65.7.4.0
Including in chipset driver package
1502
