Altos R5250 Installation Configuration Guide
68
Onboard NVIDIA
nForce Networking
Controller
65.3.1.0
Including in chipset driver package
9.21
Onboard XGI Z9s
6.14.10.900
\Disk\R5250\onboard\xgiz9s\x64\wsxp\
ATI FireGL V5200
8.323.1.0
\Disk\R5250\graphic\V5200\x64\wsxp\
Software Required
The management utility for SAS RAID daughter board and NIC can be found in
the EasyBUILD 8.0 build 100 (or later).
Software
Version
Directory on EasyBUILD
MegaRAID Storage
Manager
2.30-00 \app\r5250\raid\lsi1068\Windows\
ForceWare Network
Access Manager
65.31
Including in chipset driver package
9.21
Configuring SAS RAID Daughter Board
Please refer to the Appendix C. for the SAS RAID Daughter Board
Configuration.
Installation Tips
1.
As Windows XP x64 can’t recognize the SAS RAID daughter board, you
need to make a driver diskette from the EasyBUILD 8.0 build 100 first
before the installation.
2.
Press F6 at the beginning of installation for providing the driver diskette
for the onboard SATA RAID.
3.
Select “LSI Embedded MegaRAID (Windows XP/2003 64-bit)” as target
driver
4.
After loading the SATA RAID driver from the diskette, follow the normal
procedure to finish the installation.
Chipset Driver Package Installation
The chipset driver installation is the same as SAS daughter board installed.
Please refer to the Windows XP Professional x64 Edition SP2 Installation (SAS
Daughter Board) Chipset Driver Installation section.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver would be installed automatically when you installing
the chipset driver package.
VGA Driver Installation (onboard XGI Z9s)
The XGI Z9s driver installation is the same as SAS daughter board installed.
Please refer to the Windows XP Professional x64 Edition SP2 Installation (SAS
Daughter Board) XGI Z9s Driver Installation section.
