Altos R5250 Installation Configuration Guide
72
2.
Please insert the EasyBUILD 8.0 build 100 into the optical drive
3.
Expand Drivers -> Altos R5250 -> Chipset, select Windows XP and click on
Setup.
4.
Follow the instruction and use the default setting to install all of the
drivers and utilities in the driver package.
5.
After all drivers and utilities are installed, please reboot the system.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver will be installed automatically when you installing the
chipset driver package.
VGA Driver Installation (onboard XGI Z9s)
1.
Windows XP cannot recognize the onboard VGA. You can find the XGI
Z9s driver in EasyBUILD 8.0 build 100. Please insert the EasyBUILD 8.0
build 100 into the optical drive.
2.
Expand Drivers -> Altos R5250 -> Graphics adapters -> XGI Z9s, select
Windows XP and click on Setup.
3.
Follow the instruction to install the VGA driver.
4.
Please reboot the server after the driver is installed.
5.
After the system rebooted, you would see XGI Z7/Z9/Z9s/Z11 v1.09.03
listed in Display adapters in Device Manager.
VGA Driver Installation (ATI FireGL V5200)
NOTE. With ATI FireGL V5200 installed, you need to disable onboard VGA
