Altos R5250 Installation Configuration Guide
76
VGA Driver Installation (ATI FireGL V5200)
The ATI FireGL V5200 driver installation is the same as SAS daughter board
installed. Please refer to the Windows XP Professional Edition SP2 Installation
(SAS Daughter Board) ATI FireGL V5200 Driver Installation section.
RAID Utility Installation
The MegaRAID Storage Manager installation for SAS RAID daughter board is
the same as SAS daughter board installed. Please refer to the WindowsXP
Professional Edition SP2 Installation (SAS Daughter Board) RAID Utility
Installation section.
Network Utility Installation
The ForceWare Network Access Manager is included in the chipset driver
package. The ForceWare Network Access Manager will be installed
automatically when you installing the chipset driver package.
Windows XP Professional Edition SP2 Installation (with onboard
SATA RAID)
Below information describes how to manually install Windows XP Professional
Edition on Altos R5250 with onboard SATA RAID enabled.
Drivers Required
For Windows XP Installation, the following device drivers are required.
Device Version
Directory on EasyBUILD
Onboard SATA
RAID
5.10.2600.687 \Disk\R5250\onboard\sataraid\wsxp\
Onboard NVIDIA
NFP3600 Chipset
Package 9.21
\Disk\R5250\onboard\Chipset\wsxp\
Onboard NVIDIA
nForce Networking
Controller
65.3.1.0
Including in chipset driver package
9.21
Onboard XGI Z9s
6.14.10.900
\Disk\R5250\onboard\xgiz9s\wsxp\
ATI FireGL V5200
8.323.1.0
\Disk\R5250\graphic\V5200\wsxp\
Software Required
The management utility for onboard SATA RAID and NIC can be found in the
EasyBUILD 8.0 build 100 (or later).
Software
Version
Directory on EasyBUILD
Onboard SATA
RAID utility
5.10.2600.68
7
Including in chipset driver package
9.21
ForceWare Network
Access Manager
65.31
Including in chipset driver package
9.21
