Acer s10 Manual Download

Page: 62 / 338

3 M a n a g i n g y o u r a p p l i c a t i o n s

Security

Displaying private records

Using the security application, you can also display private records that have been
previously masked or hidden.

NOTE:

If you have assigned a password to your device, you must enter it before

private records are displayed. Refer to "Assigning security options" on page viii.

To unmask individual records:

Tap a masked record.

If you do not have a password, a masked record becomes visible.

If you have a password, the Show Private Records dialog box appears. Go to step 2.

Enter your password.

Tap OK.

To display private records:

Do one of the following to display the Change Security dialog box:

• In Applications Launcher, tap the Security icon.

• From within an application, tap the inverted application title tab at the top

of the screen; then tap Security in the Options menu.

• From within any application, drag your pen diagonally across the writing area

of the Graffiti screen from lower left to upper right to bring up the
Command Bar. Tap the padlock icon.

From the Current Privacy pick list, tap Show Records.

Illustration suggestion (Delete this suggestion when completed):

Show

Change Security dialog box with Show Records option selected

If you do not have a password, masked and hidden records become visible.

If you have a password, the Show Private Records dialog box appears. Go to step 3.

Illustration suggestion (Delete this suggestion when completed):

Show Pri-

vate Records dialog box

Enter your password.

Tap OK.

Summary of Contents for s10



















































































































































































































































































































































Search results

Summary of Contents for s10

Reviews:

Related manuals for s10

Brands by name

Popular brands

Acer s10, Manual

Search results

Summary of Contents for s10

Reviews:

Related manuals for s10

Brands by name

Popular brands