Chapter 2
29
Onboard Devices Configuration
The parameters in this screen are for advanced users only. You do not need to change the values in this
screen because these values are already optimized.
The Onboard Devices Configuration sub-menu assigns resources to basic computer communication
hardware.
The following table describes the parameters in this sub-menu. Settings in boldface are the default and
suggested parameter settings.
Parameter
Description
Options
Serial Port
Enables or disabled the serial port.
When enabled, you can set the base I/O address and
interrupt request (IRQ) of the serial port.
Enabled or Disabled
3F8h, 3E8h, 2F8h or 2E8h
4 or 11
IrDA Port
Enables or disables the infrared port.
When enabled, you can set the base I/O address,
interrupt request (IRQ) and direct memory access (DMA)
channel of the infrared port.
Enabled or Disabled
2F8h, 3E8h, 3F8h, or 2E8h
3 or 10
Parallel Port
Enables or disables the parallel port.
When enabled, you can set the base I/O address,
interrupt request (IRQ) and operation mode of the
parallel port.
If operation mode is set to ECP, the direct memory
access (DMA) channel of the parallel port is set to 1.
Enabled or Disabled
378h, 278h, or 3BCh
7 or 5
ECP, EPP, Standard, or Bi-directional
340SG.book Page 29 Thursday, October 28, 1999 10:51 AM
Summary of Contents for TravelMate 340
Page 74: ...68 Chapter 6 340SG book Page 68 Wednesday November 3 1999 11 46 AM ...
Page 82: ...76 Chapter 6 340SG book Page 76 Wednesday November 3 1999 11 46 AM ...
Page 84: ...78 Appendix A 340SG book Page 78 Wednesday November 3 1999 11 46 AM ...
Page 94: ...88 Appendix C 340SG book Page 88 Wednesday November 3 1999 11 46 AM ...