44
Chapter 3
Removing the Hard Disk Drive Module
1.
Remove the screw of the hard disk module.
2.
Slide the hard disk module out from its bay.
NOTE:
1
After loosening the hard disk drive screw, you must completely remove it so you can then slide out the
hard disk drive. It may be a little difficult to completely remove the screw.
Disassembling the Hard Disk Drive Module
1.
Gently, detach the connector from the hard disk module.
2.
Remove the two screws on both sides of the hard disk module.
3.
Remove the hard disk plate from the hard disk module.
4.
Slide the hard disk out from the hard disk drive bezel.
5.
This completes the disassembly procedure of the hard disk drive.
1
New added description. Please pay attention to this note.
340SG.book Page 44 Thursday, October 28, 1999 10:51 AM
Summary of Contents for TravelMate 340
Page 74: ...68 Chapter 6 340SG book Page 68 Wednesday November 3 1999 11 46 AM ...
Page 82: ...76 Chapter 6 340SG book Page 76 Wednesday November 3 1999 11 46 AM ...
Page 84: ...78 Appendix A 340SG book Page 78 Wednesday November 3 1999 11 46 AM ...
Page 94: ...88 Appendix C 340SG book Page 88 Wednesday November 3 1999 11 46 AM ...