51
English
•
During the POST, press
F2
to access the BIOS Utility and verify that
the infrared port is enabled.
•
Make sure both devices are IrDA-compliant.
The printer does not work.
Check the following:
•
Make sure that the printer is connected to a power outlet and that
it is turned on.
•
Make sure that the printer cable is connected securely to the
computer’s parallel port and the corresponding port on the
printer.
•
During POST, press
F2
to access the BIOS Utility and verify that the
parallel port is enabled.
I want to set up my location to use the internal modem.
To properly use your communications software (e.g. HyperTerminal),
you need to set up your location:
1
Click on
Start
,
Settings
,
Control Panel
.
2
Double-click on
Modems
.
3
Click on
Dialing Properties
and begin setting up your location.
Refer to the Windows manual.
Summary of Contents for TravelMate 370 series
