38
Chapter 2
System Devices
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
The table below describes the parameters in the screen. Settings in
boldface
are the default and suggested
parameter settings.
Parameter
Description
Options
Serial Port
Enables, disables or auto detects the serial port.
Enabled
/Disabled/Auto
Parallel Port
Enables, disables or auto detects the parallel port.
Enabled
/Disabled/Auto
Mode
Sets the operation mode of the parallel port.
ECP
, EPP, Output only or Bi-
directional
Base I/O address
Sets the I/O address of the parallel port. This
parameter is enabled only if Mode is set to ECP or
Bi-directional. This parameter is enabled only if
Mode is set to ECP.
378
/278/3BC
Interrupt
Sets the interrupt request of the parallel port.
IRQ7
/IRQ5
DMA channel
Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP.
DMA3
/DMA1
Internal Touchpad
Determines whether or not to disable the internal
pointing device as the PS/2 mouse is connected.
Both
or Auto
Infrared Port (FIR)
Enables, disables or auto detects the infrared port.
Disabled
/EnabledDisabled/Auto
Summary of Contents for TravelMate 660 series
