Chapter 2
27
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press
m
during POST (when “Press
<F2>
to enter Setup” message is prompted on
the bottom of screen).
Press
m
to enter setup. The default parameter of
F12
Boot Menu is set to “
disabled
”. If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to “
enabled
”.
Press
<F12>
during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
System Utilities
Chapter 2
Summary of Contents for TravelMate 8471 Series
