System Board
1-17
5.
Place the heatsink with fan on top of the CPU and attach the
spring clips to the socket flanges.
Figure 1-9
Attaching the Heatsink and Fan to the CPU
6.
Plug the fan cable to the fan connector on the system board.
1.9
IDE Hard Disk Support
The system board supports four IDE hard disks, or any other IDE
devices, through the two onboard PCI IDE interfaces. See Figure 1-2
for the location of the IDE interfaces.
Follow the instructions in the housing installation manual on how to
install a hard disk in the system. Connect the cables according to the
IDE hard disk configuration in Table 1-7.
Table 1-7
IDE Hard Disk Configuration
IDE Connector
Master
Slave
IDE Channel 1
Hard disk 0
Hard disk 1
IDE Channel 2
Hard disk 2
Hard disk 3 /
IDE CD-ROM drive