Veriton 3600(D/G)/5600(D/G)/7600(D/G)
96
Removing the System Main Board
1.
See “Removing the Housing Cover” on page 85
2.
See “Removing a Dummy Link Bar” on page 86
3.
See “Removing the AGP VGA Card” on page 87
4.
See “Removing the Modem Card” on page 87
5.
Before you remove the system main board, make sure that all cables connected to the main board are
removed.
6.
Remove the eight screws as shown here and then detach the main board from the housing
.
Removing the I/O Port Bracket
1.
See “Removing the Housing Cover” on page 85
2.
See “Removing a Dummy Link Bar” on page 86
3.
See “Removing the AGP VGA Card” on page 87
4.
See “Removing the Modem Card” on page 87
5.
See “Removing the System Main Board” on page 96
6.
Slide the bracket and then lift it up in the direction as shown.
Summary of Contents for Veriton 7600G
