Chapter 2
20
Power Management Setup
Parameter
Description
Option
ACPI Aware O/S
This item supports ACPI (Advanced Configuration and Power
management Interface).Usethis item to enable or disable the ACPI
feature.
YES
No
ACPI Suspend Mode
Select an ACPI state.
S3 (STR)
S1 (POS)
Deep Power Off Mode
If Enabled, it will support EUP Lot6 Function.
If Disabled, it will not support EUP Lot6Function.
Enabled
Disabled
Power On by RTC Alarm
Enables or Disables to wake up the system by RTC Alarm Function
Enabled
Disabled
Power On by PCIE Devices
Enables or disables to wake up the system from a power saving mode
through an event on PCI Express device.
Enabled
Disabled
Power On by Modem Ring
This system can be turned off with a software command. If you enable
this item, the systemcan automatically resume if there is an incoming
call on the Modem. You must use an ATXpower supply in order to use
this feature.
Disabled
Enabled
Wake Up by PS/2 KB/
Mouse
Enables or disables to wake up the system from a power saving mode
using a PS2 keyboard or mouse.
Enabled
Disabled
Wake Up by USB KB/
Mouse
If enabled, press any key or click the mouse will wake system from S1/
S3 state.
Enabled
Disabled
Restore On AC Power Loss
Enables or disables the system to reboot after a power failure or
interrupt occurs.
Power Off
Power On
Last State