13
English ...
Acer WP100
Connecting to a projector
Once you’ve installed the software, you will be able to connect to any
projector that is equipped with the Acer WPG. To connect to a projector,
simply double-click the Acer WPG icon on your desktop to launch the
application.
The application will automatically detect available WPGs. Each WPG
is identifiable by the "AcerWirelessGateway-" indicator in the SSID. If
the projector is installed in a permanent location, you may also choose
to assign a specific SSID to that projector, indicating, for example,
the number of the room in which the projector is installed (refer to
"Configuration" later in this guide).
If there are multiple WPGs within the range of your notebook's receiver
(they may be in different rooms), and the feature is enabled (refer to
"Configuration" later in this guide), you will be able to identify the
correct one by the "Projector ID" indicated in the top left-hand corner
of the projected screen. The Projector ID consists of four randomly-
generated numbers. Entering these numbers into the WPG application on
your notebook will restrict your connection to only that projector.
Only one user can use the WPG at any time; if another user wishes to
use the projector, you will need to click
Disconnect
to stop using the
projector, and allow someone else to use the projector.
Summary of Contents for WP100
Page 1: ...Acer WP100 User s Guide ...
Page 4: ...Acer WP100 ...
