acerpure Cozy Series, User Manual

8

Product Assembly and Use

Installing the remote control battery

Using the remote control

1.  Gently press the button 

on the left side and pull 
down the battery case to 
take it out.

Up to

600

cm

Open

2.  Place the battery such 

that the positive pole (+) 
faces upwards.

3.  Place the battery case 

back into the slot and fix 
it into place.

Close

Open

Install

Close

Battery use precautions

1.  Do not store the battery in places within the reach of children or infants. If accidentally swallowed, please 

consult a doctor immediately.

2.  If the fluids leaking out of the battery come into contact with the eyes, do not rub the eyes. Rinse thoroughly 

with clean water and consult a doctor immediately. Please note that this may lead to vision loss.

3.  If the fluids leaking out of the battery come into contact with the skin or clothes, rinse with water immediately. 

Please note that this may lead to stains.

4.  If you need to dispose of the battery, please follow the local waste sorting requirements (and use clear tape to 

wrap both the "+" and "-" sides).

Remote control precautions

1. The remote control must face the signal receiver directly.
2.  The remote control shall be used within a distance of approximately 600cm from the signal receiver and facing 

towards the signal receiver. If the remote control is not facing towards the signal receiver, the effective 
distance will be decreased.

3. Do not place any objects between the signal receiver and the remote control.
4.  Please store the remote control properly and avoid crashing or dropping it. Please remove the battery and 

store it properly when the remote control is not used.

Remote Control
Signal Receiver