background image

1

AM-170

250-Watt Professional Mixing Amplifier

®

User Manual

NOTE: To ensure this system works safely and to its fullest potential, please read the User Manual before 

use, and keep it handy for future reference. See important safety information on Pages 7-8.

Thank you for purchasing Acesonic’s AM-170 250-

Watt (@ 4 Ohms) Professional Mixing Amplifier. 

Acesonic takes pride in providing its customers with 

only the most advanced and highest quality products 

on the market. With proper care and use you will 

get many years of satisfying use from your Acesonic 

product.
Be sure to keep original packaging in case re-shipping 

is required for returns or repairs.

First Things First

Before using your AM-170, take a few simple steps:

• Check to see that your local power outlets supply 

the correct voltage for the AC input.

• Do not open the device as there are no user-

serviceable parts inside. For repairs, contact the 

local distributor, an authorized service center or 

Acesonic’s U.S. headquarters.

• Care and cleaning directions are included in this 

User Manual, but preventive measures are good 

common sense. Do not use the device in areas that 

are wet or prone to dampness. Always allow suffi-

cient room around the device to provide sufficient 

air flow for cooling.

• When the device will not be used for a long period 

of time, disconnect the power plug from the wall, 

as well as the back of the unit, and remove all con-

necting cables for proper storage.

Table of Contents

First Things First .................................................1
System Components ............................................2
Product Features ..................................................2
Initial Setup Considerations ................................2
Front Panel Operations .......................................2
Back Panel Operations ........................................3

Remote Control Operations ................................4
Care & Maintenance ...........................................4
Troubleshooting ..................................................5
Connecting the AM-170 .....................................6
FCC Advisory, Safety Warnings & Safe Use .......7
Company Contact Information ...........................8

Summary of Contents for AM-170









Reviews: