Thank
you
for
purchasing
Acesonic
'
s
UHF
-
1208X
.
Acesonic
takes
pride
in
providing
our
custmers
with
only
the
most
advanced
and
highest
quality
karaoke
products
on
the market. Please read trough this USER’S
MANUAL before operation to ensure proper usage, and keep for future
Table of Contents
Warnings and Caution....................................................................................2
Safety Instructions........................................................................................3
Table of Contents...........................................................................................4
Included Accessories.................................................................................... 4
Receiver/Display panel Descriptions............................................................. 5
Microphone Descriptions/Operation/Channel Switching...............................6
Installation & IR SYNCing(channel switching)................................................7
Troubleshooting............................................................................................8
Features & Specifications..............................................................................9
Manufacturer Information............................................................................10
4
Acesonic UHF-1208X
Before installing your wireless microphone, Here are a few things you should do/know:
Parts checklist
l
Handheld microphone(2)
l
Mounting brackets(1 Set)
l
AC power adapter(1)
l
UHF-1208X receiver (1)
*Be sure to keep original packaging in case of re-shipping is needed.
l
l
Antenna(2)
l
User manual / warranty card
3 ft. male to male " cable (1)
¼
1)Check to see whatever the local voltage accord with operating receiver voltage(Wrong
selection may lead to burn out of receiver)
2)Do not dismantle the machine on your own. For internal repair, please contact the local
distributor or accepted service center. Please see page 10 for more detail.
3)When the machine will not be used for a long time, please disconnect the power plug
from receiver.
4)Do not recharge your batteries until the batteries are low.
Matters Need Attention
Cleaning
l
Please make sure the power is disconnected before cleaning or repairing the machine.
l
The machine can be cleaned by using a soft cloth with water. Dry the machine with a dry
cloth and let it air dry for 15 minutes.
l
Please do not use volatile gasoline, diluents or other chemicals to cleaned the machine
