Starting the Vehicle
1. Study and understand controls.
2. Make sure everyone is seated with all parts of their body inside the vehicle.
3. Make sure everyone’s “
Seat Belts
” are properly fastened.
4. Make sure front wheels are turned in the desired travel direction.
5. Make sure the “
Direction Control Switch
” is in Neutral center position
N
6. Turn “
Key Switch
” 45 degrees in clockwise direction to the “
ON
” position and
make sure nothing is in your path.
7. Select the travel direction using the “
Direction Control Switch
”. (
D
or
R
)
8. Slowly depress the “
Accelerator Pedal
” (
GO
) and bring vehicle up to desired
speed.
9. The park brake will automatically release when either the accelerator or brake
pedal is depressed.
Stopping or slowing the Vehicle
1. Release “
Accelerator Pedal
” (
GO)
and depress the “
Brake Pedal
” (
STOP)
.
The vehicle will begin to come to a stop.
WARNING!
Driving through water may affect the brakes.
When stopped on a hill, use the brake pedal to hold your
position. Do not use accelerator pedal.
Parking and Leaving the Vehicle
1.
After vehicle comes to a complete stop, firmly depress park brake pedal
“
PARK
” until it locks into position to prevent the vehicle from rolling.
2.
Put the “
Direction Control Switch
” in the “
Neutral
” position
N
3.
Turn the “
Key Switch
” in the counter-clockwise direction to the vertical “
OFF
”
position.
4. Remove key to prevent theft and/or unauthorized use of the vehicle.
Copyright © 2012-2015 American Custom Golf Cars, Inc.
Page
54