121019 80493_E
Product subject to change without notice.
3: ATTACH GUIDE
NOTE:
Cable should follow a natural path on top of end cap without interference from
edge of tarp or wind deflector (ensure cable does not get caught on corner of end cap
or latch plate).
A. Place guide 1/2” back from edge of latch plate. Mark and drill (2) 5/16” holes.
Fasten guide with (2) 3/8” x 1” self-threading hex bolts.
1/2”
Guide
3/8” x 1”
Self-threading hex bolts
Latch
plate
B. Open and close tarp several times. Make adjustments in knot location if needed.
Path
of cable
Cable
