Crane Scales
PAGE: 18
Model HACS
689 SW 7
th
Terrace, Dania Beach, FL 33004 | (954) 367-6116
Visit WWW.ACIHOIST.COM for the most current information
The weight reading on scale must return 0 (or 0.0 or 0.00, depending on the resolution) before next weight
reading can be added. This assures that a load on the scale is only added to the Total once. Otherwise, error
message
will flash.
6.3 View Total
Action
To view the Total in scale, press
on remote controller.
Function
The scale is switched into View Total Mode.
The screen flashes current Total, for example, 3205kg.
Condition
The scale must not be in Hold mode. Otherwise, error message
will keep flashing.
The Total must be greater than 0 (or 0.0 or 0.00, depending on the resolution). Otherwise, error message
will flash.
To learn more about View Total, please refer to section 6.3 - View Total.
6.4 Delete Last Total
Action
To delete the last accumulated weight reading, press
on remote controller.
Function
If the last totaled weight was a mistake, it can be erased by Delete Last Total. This erases only the last totaled
value.
The screen displays the below message, indicating that the last Total is successfully deleted.
The accumulator always uses the displayed weight, so
GROSS
and
NET
readings can be added into the same
TOTAL
.
