Crane Scales
PAGE: 26
Model HACS
689 SW 7
th
Terrace, Dania Beach, FL 33004 | (954) 367-6116
Visit WWW.ACIHOIST.COM for the most current information
6.10.6 Anti-Motion Level
At the cost of measuring time, Anti-Motion function intelligently settles the weight reading when the scale is in motion.
The weaker Anti-Motion is, the faster weight reading displays, but the longer it takes to settle the weight reading.
There are optional 6 levels of Anti-Motion, “0”, “1”, “2”, “3”, “4”, “5”, respectively “Off”, “weakest”, “weak”, “normal”,
“strong”, and “strongest”.
The default Anti-Motion Level is set to “2”, namely “normal”.
6.11 Communication Setup
Action
To enter Communication Setup Mode, press
and
on remote controller in turn.
To input digits, press ZERO and TARE button on scale or
and
on remote controller.
To confirm input value, press HOLD button on scale or
on remote controller.
To save and exit Communication Setup Mode, press 2ND button on scale for
on remote controller.
To exit Communication Setup Mode without saving, press ON/OFF button on scale or
on remote controller.
Function
In Communication Setup Mode, user can change the scale’s serial communication manner to meet the receiver’s
requirement, like communication on/off status, baud rate, scale communication address, signal output mode,
etc.
The screen displays the welcome message as below.
High resolution offers better accuracy at the cost of longer
measuring time and stricter requirement of load’s stability.
Designed to meet the OIML R76’s directive, this scale has the
best (default) performance at the 2000 to 3000 division.
