Crane Scales
PAGE: 8
Model HACS
689 SW 7
th
Terrace, Dania Beach, FL 33004 | (954) 367-6116
Visit WWW.ACIHOIST.COM for the most current information
Finally, the screen shows detection message while scale detects its load and Auto-Zero itself to Zero status,
when the Auto-Zero function is enabled.
To learn more about Auto-Zero function, refer to Auto-Zero Range in Scale Configuration function for details.
After scale is completely powered up, it is ready to weigh loads.
4.2 Zero
Action
To Zero the scale, press ZERO button on scale or
on remote controller.
Function
Scale sets current load to be Zero, as if it has no load.
The ZERO indicator
lights on.
The weight reading turns “0”, (or “0.0” or “0.00”, depending on the resolution).
Condition
The scale must not be in Hold mode. Otherwise, error message
will keep flashing.
The scale must be stable. Otherwise, error message
will flash.
Current weight reading is in Manual-Zero Range. Otherwise, error message
will flash.
To learn more about Manual-Zero Range, please refer to Scale Configuration function.
4.3 Tare In
Action
To Tare In a tare weight into scale, press TARE button on scale or
on remote controller (when the scale is in
Gross Mode).
