12
2: ASSEMBLING SNOWPLOW
(Continued)
R. Insert
(2) square nuts with flat side up into top channel.
S. Turn
hex jam nut with flange side facing down onto threaded base of blade marker
and align with hole on lift handle. Bolt blade marker and handle to blade using square nut
in channel.
T. Turn 3/8” x 3/4” hex bolt through other handle hole into nut in channel. Handle should
be flush with blade edge. Tighten both bolts on lift handle.
U. Repeat for blade marker on opposite side.
Threaded base
on blade marker
Hex jam nut
flange side down
Insert square
nuts flat side
up into channel
on blade
3/8" x 3/4" Hex bolt
Summary of Contents for SNOWSPORT HD Utility Plow
Page 4: ...4 PARTS DIAGRAM Blade marker Lift handle End plate Box end ...
Page 15: ......