Firmware Update Procedure
- Power off case and remove micro SD card from Maestro
- Insert micro SD card into computer with a card reader (not included)
- Go to acidraintechnology.com and navigate to the Maestro page
- Download maestro_1.1.zip and unzip the folder
- Inside you will find a FW.BIN file - move this onto the root directory of the micro SD card
- Eject micro SD card safely from your computer and insert it back into the Maestro with the your
case power off
- Power up your case and watch Maestro run through the firmware update animation (buttons
will slowly illuminate in rows from the bottom left to top right)
- Once the animation is complete your maestro is updated and ready for use
Firmware Update Changelog
V1.1 - March 15, 2021
ADDED: PPQN Settings in clock menu
ADDED: Internal attenuation menu
ADDED: Internal clock BPM separately selectable in save and load menu
FIXED: Clock output inverted when internally clocked
FIXED: No more minimum external clock tempo after clock engine rebuild
Maestro Firmware V1.1
10