Page 8 / 26
DTUS066 rev A1 March 21, 2012
III
LEDS AND BUTTON
III.1
Leds
The leds and the button are directly available on the WLn-LINK-OEM:
III.2
Signals relocation
All the leds and button are also made available to the host
motherboard via the P-GEN and P-LED connectors (see information in
the following chapters) in order to be used in your own way.
III.2.1 Power
GREEN
while powered on
III.2.2 Diag
GREEN
when product is OK and initialized
RED
during initialization (~ 40 seconds)
Flashing
when firmware in flash is not valid
OFF or
RED for more than 2min
: Hardware failure
III.2.3 WLAN State
Fixed GREEN
when associated with another Wi-Fi product
Flashing GREEN
when unassociated
Power
Diag
WLAN State
WLAN Activity
WLAN Strength
Ethernet 100/1000
Ethernet Link/Activity
