32
y
Network video transmission speed and quality can be configured by pressing “Frames” and “Quality” buttons as follows.
-
Frames : 1, 7, 15, 30 frames for NTSC(1, 6, 12, 25 frames for PAL)
-
Quality : Std. 1, Std. 2, Std. 3, Std. 4 (standard), High 1, High 2, High 3, Super 1, Super 2, Super 3
y
The Port Number Setup menu will allow you to set Administrator and Port Number for Video/Audio and Web Port.
y
For Port Number Setup, please get an approval of the network administrator in connection with CMS program.
Port Number:
-
Administrator:
5000~9999
-
Video / Audio:
5000~9999
-
Web:
5000~9999
y
Choose ‘OK’ to confirm the setting.
y
Please click (
) Notification, and the following screen will appear.
y
The Notification menu will allow you to set transmission of Event occurred in DVR via E-Mail.
y
Click (
) the keyboard icon on the right-hand side of Add E-Mail frame, and the virtual keyboard will appear. Please register
E-Mail address. E-Mail address should contain @.
y
Click (
) the keyboard icon on the right-hand side of SMTP Server frame, and the virtual keyboard will appear. Please
register IP of SMTP Server (mail server on the sender side) (e.g., kornet.net).
y
Click (
) the keyboard icon on the right-hand side of Sender ID frame, and the virtual keyboard will appear. Please register
an ID to the sender mail server (e.g., tony123).
y
Click (
) the keyboard icon on the right-hand side of Sender Password frame, and the virtual keyboard will appear. Please
register a password having registered to the sender mail server.
y
When an event occurs, you can send an email to a designated mail address by clicking Attach button and selecting Data to
be transmitted. You may select one of JPEG, VIDEO CLIP, None modes. In case of transmitting VIDEO CLIP Data, set the
duration of time for recoded images in Duration item (e.g., 1 sec, 3 sec, 5 sec).
4.4.2 Camera/PTZ
y
Please click (
) DEVICES>Camera/PTZ, and the following screen will appear.
CAUTION
According to the various local conditions, some e-mail servers may not work correctly with this function.
Notification
CAUTION
IF Port Number IS CHANGED, YOU MUST ALSO CHANGE Port Number OF CMS (Central Monitoring Station) PROGRAM.
CAUTION
CHANGES BEING MADE ARE APPLIED AFTER YOU COMPLETE SETUP TO EXIT.
CAUTION
YOU CANNOT CHANGE Port Number DURING CMS ACCESS TO DVR.
