3 A
1.
HTP
mode: the higher DMX value form input A or B will take the order.
2.
B-up
mode: When one input without DMX signal inputs together, it will
take the DMX signal from another input.
3.
Merg
mode: Combine the DMX signal inputs together. For example,
when the DMX–A has 24 channels input and the DMX-B has 48
channels input, it will merge the 2 inputs together, and send out 72
channels.
Attention:
in
MERG
mode, you must set the start address for DMX-B.
ADDR
Set the address in
MERG
mode, it will be the start address of the DMX-B
input. For example, when the DMX–A has 24 channels input and the
DMX-B has 48 channels input, if you set the address to be 21, then the unit
will send out total 68 channels, 1-20 channels are 1-20 channels of DMX-A
input, 21-68 channels are 1-48 channels of DMX-B input.
TIME:
Used to set the time that the unit send each group of signal. It’s useful for
the lightings whose process speed is not quick enough. You can set it from
23ms to 45ms.
NOMD
1.
Null
mode: if there is no DMX input, then there will no DMX output.
2.
HOLD
mode: if there is no DMX input, it will keep the current DMX
output.
3.
CLR
mode: if there is no DMX input, all the DMX output will be 0.
