ACME ColorTec 250 LED-CC60, User Manual

8A 

 Dimmer Calibrate

Select the 

, press the 

ENTER

 button and the display will blink. Use the 

DOWN

 and 

UP

button to calibrate the dimmer for a maximum output from 

  (limited to 70% of the really 

max. output) to 

  (maximum output is not limited). Once the mode has been selected, press 

the 

ENTER

 button to setup, to go back to the functions without any change press the

 MENU

button again. Hold and press the 

MENU

 button about one second or wait for one minute to exit the 

menu mode. 

Sound Mode

Select the 

  is showing on the display. Pressing the

 ENTER

 button and the display will blink. 

Use the

 DOWN

 and 

UP

 button to select the 

 (sound on) or 

 (sound off) mode. Once 

the mode has been selected, press the 

ENTER

 button to setup or automatically return to the main 

functions without any change after 8 seconds. To go back to the functions without any change press 

the

 MENU

 button again. 

Sound Sense

Select the 

, press the 

ENTER

 button and the display will blink. Use the 

DOWN

 and 

UP

button to adjust the sound sensitivity between 

 and 

. Once selected, press the 

ENTER

button to setup, to go back to the functions without any change press the

 MENU

 button again. Hold 

and press the 

MENU

 button about one second or wait for one minute to exit the menu mode. 

Blackout Mode

Select the 

, press the 

ENTER

 button and the display will blink. Use the 

DOWN

 and 

UP

button to select the 

  (yes blackout) or 

  (no blackout) mode. Once selected, press the 

ENTER

 button to setup or automatically return to the main functions without any change after 8 

seconds. To go back to the functions without any change press the

 MENU

 button again.