56
GB
3.12.1 FTP Server Configuration
-
You can configure the username and password of the FTP Server. If you wish
to do so, please refer to ‘
3.1.5 Network setup
’.
On your product,
- Assign a manual Fixed IP address for the product, for example 192.168.0.9
when you connect to your router either via wired or wireless connection.
- Assign the same subnet mask as your router, usually 255.255.255.0 and the
gateway of your router (router’s local IP address, usually 192.168.xxx.xxx).
Please refer to your router documentation on getting this information from your
router.
-
Key in your router DNS IP address (primary or secondary)
On your router,
-
Configure FTP Server within your router’s Virtual Server setting and key in the
above IP address in example, 192.168.0.9 and change the public port to 21
and private port to 21 which is by default.
-
For your convenience, you can also choose to enable Dynamic DNS and sign
up for a free DDNS domain at any of the website providing such free services.
An example would be
www.dyndns.com
-
At your router’s DDNS page, key in your host name and enter the same user
name and password when you create a DDNS account. Please refer to your
router documentation on getting this information from your router.
3.12.2 Accessing from a FTP program
Using your favourite FTP application on your PC, an example would be ALFTP,
which can be downloaded from
http://www.altools.com/ALTools/ALFTP.aspx
At the FTP program connection page, you can either connect using your router’s
WAN IP address or via your DDNS host name.
Be sure to start the FTP service with your User Name and Password as discussed
at FTP, ‘
3.1.5 Network setup
’
Summary of Contents for DP-02
Page 1: ...Digital Home Multimedia Center Model DP 02 www acme eu ...
Page 2: ......
Page 201: ......
Page 202: ...www acme eu Digital Home Multimedia Center Model DP 02 ...
