10
Video recording
Release
button
"START"
When switching on the camera you can start
recording immediately pressing the "Start"
button. To stop press the button again.
Never remove the SD card or battery when
the cam is recording or still saving -
displayed by a rotating circle!
Photo shooting
Use the cross pad to get to the photo mode. Press the release button once to make a single
shot. To activate the serial photo function, press "M" to select the sequence.
Confirm you selection by pressing the “Start” button again. With next press of “Start” the cam
starts the serial photo mode, taking photos for instance every 5 seconds.
Using the Zoom
Zoom in
Zoom out
You can use the digital zoom while
recording pressing the top buttons of
the panel.
The zoom is displayed in a bar in the screen.
Playback of Video and Photos
Move to "Play" mode to view the recorded data. Recommended is to use a TV or the optional
2, 5" Screen. (Art.-No: FCHD02)
Use the cross pad to move through the recorded files and start playing by pressing the
release button. Left and right increase or reduce the playback speed.
Playback at the TV
Connect the included RCA-cable to you TV and set it to "AV"
Connecting the optional screen
The optional 2, 5" screen will be plugged into the cam
directly. Different mounts allow fixing it individual. At
the wrist when the camera is mounted at the helmet,
inside the car, at the handle bar of a bike.
The Y-cable enables the simultaneous use of the
CarcamOne-cable and screen!
