12
GB
Selecting Shot of steam and steam when ironing vertically.
Press the shot of steam button (5) to generate a powerful burst of steam that can penetrate the
fabrics and smooth the most difficult and tough creases. Wait for a few seconds before pressing
again [Fig. 4].
By pressing the shot of steam button at intervals you can also iron vertically (curtains, hung
garments, etc.) [Fig. 5].
Warning:
the shot of steam function can only be used at high temperatures. Stop the emission when
the plate temperature control light (6) comes on, than start ironing again only after the light has gone
off.
dry ironing
To iron without steam, follow the instructions in section “steam ironing”, leaving the steam selector
(3) on position
.
Spray Function
Make sure that there is water in the reservoir. Press the spray button (4) slowly (for a dense spray)
or quickly (for a vaporized spray) [Fig. 6].
Warning:
for delicate fabrics, we recommend moistening the fabric beforehand using the spray
function (4), or putting a damp cloth between the iron and the fabric. To avoid staining, do not use the
spray on silk or synthetic fabrics.
