9B
DISPLAY INVERSE
To select
, press the
ENTER
button to show
DISPLAY
on the display, and press the
ENTER
button again, it will show the
(inversion). To go back to the functions without any changes
press the
MENU
button.
TILT INVERSION
To select
, press the
ENTER
button to show the
TILT
on the display. Use the
DOWN
/
UP
buttons to select
(activate tilt inversion) or
(Normal, deactivate tilt inversion).
Once the mode has been selected, press the
ENTER
button to setup. To go back to the functions
without any changes press the
MENU
button again. Press and hold the
MENU
button for about
one second or wait for 7 seconds to exit the menu mode.
LED INVERSION
To select
, press the
ENTER
button to show
REVERSION
on the display. Use the
DOWN
/
UP
buttons to select
(the leds will light up from right to left) or
(Normal, the leds
will light up from left to right). Once the mode has been selected, press the
ENTER
button to setup.
To go back to the functions without any changes press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for 7 seconds to exit the menu mode.
AUTO TEST
To select
, press the
ENTER
button to show
TEST
on the display and the unit will run a
self-test . To go back to the functions without any changes press the
MENU
button again. Press
and hold the
MENU
button for about one second or wait for 7 seconds to exit the current mode.
TEMPERATURE
To select
, press the
ENTER
button to show the
TEMPERATURE
on the display and the
display will show the temperature of the unit. To go back to the functions without any changes
