7B
DMX 512 ADDRESS
To select
, press the
ENTER
button to show
DMX ADDRESS
on the display. Use the
DOWN
/
UP
buttons to adjust the address from 1 to 512. Once the address has been selected, press the
ENTER
button to setup. To go back to the functions without any changes press the
MENU
button
again. Press and hold the
MENU
button for about one second or wait for 7 seconds to exit the
menu mode.
SLAVE MODE
To select
, press the
ENTER
button to show
SLAVE MODE
on the display. Use the
DOWN
/
UP
buttons to select
(normal) or
(2 light show) mode.
Once selected, press
the
ENTER
button to setup. To go back to the functions without any changes press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for 7 seconds to exit
the menu mode.
CHANNEL MODE
To select
, press the
ENTER
button to show
CHANNEL MODE
on the display. Use the
DOWN
/
UP
button to select
1
,
4
,
9
or
11
channel modes. Once the mode has been selected, press
the
ENTER
button to setup. To go back to the functions without any changes press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for 7 seconds to exit
the menu mode.
ANGLE SETTING
To select
, press the
ENTER
button to show
ANGLE SETTING
on the display. Use the
DOWN
/
UP
button to select the
150°
,
120°
or
90° mode
.
Once the angle has been selected, press
the
ENTER
button to setup. To go back to the functions without any changes press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for 7 seconds to exit
the menu mode.
