www.ACME-online.de
ACME the game company
.
Inserting the battery
Slide the battery cover towards the backside of the quadrocopter and open it.
Check the polarity before connecting the battery to the model!
When reinserting the battery into the housing, make sure that the cables don’t fold. Connect the
battery to the plug and follow the lead, do not forget the polarity. Then close the battery cover again.
Always switch on the controller and then the model!
Switch off: First the model, then the controller!
Controller and model are already paired out of the box, which means that both are ready for flight.
First fly
Before you perform your first flights, make sure that there are no persons or animals nearby.
Keep a free area of 3x3 meters !
Place the quadrocopter on an even surface.
The orange rotor blades mark the front of the model, where as the white rotor blades mark the tail of
the qadrocopter. The different colors will assist your orientation during flight. Stay away for around 2
meters behind the model and carefully test the functions that are described in the following steps.
Start at low gas and speed.
Rise / Descend
Move up the gas stick (left) to let the model rise
and down to descend it.
Right / Left
Move the control stick (right) to left or right,
to let the model hover into these directions.
Turn
Move the left stick to the left or right to turn the
Model around it it’s own axis.
Forwards / Backwards
Move the control stick (right)
up or down to fly for- and backwards.
