Manual Test
Select
Manual Test
, press the
ENTER
button to confirm, the present channel will show on the
display, use the
UP
/
DOWN
button to select channel, press the
ENTER
button to confirm, then use
the
UP
and
DOWN
button to adjust the value, press the
ENTER
button to store, the fixture will run
as the channel value indicates. Press the
MENU
button back to the last menu or exit menu mode
idling 30 seconds.
(All channels value will become 0 after exiting Manual Test menu)
Fixture Information
To select
Fixture Information
, press the
ENTER
button to confirm, use the
UP
/
DOWN
button to
select
Fixture Use Hour, Light Use Hour, Temperature, Lamp State, Fan State
or
Firmware Version.
Fixture Use Hour
Select
Fixture Use Hour
, press the
ENTER
button to confirm, fixture use time will show on the
display, press the
MENU
button to exit.
Light Use Hour
Select
Light Use Hour
, press the
ENTER
button to confirm, light use time will show on the display,
press the
ENTER
button to confirm, use the
UP
/
DOWN
button to select
Exit
or
Reset Time
, press
the
ENTER
button to confirm, press the
MENU
button to exit.
Temperature
Select
Temperature
, press the
ENTER
button to confirm, fixture temperature will show on the
display, press the
MENU
button to exit.
Lamp State
Select
Lamp State
, press the
ENTER
button to confirm, lamp state will show on the display, press the
MENU
button to exit.
Fan State
Select
Fan State
, press the
ENTER
button to confirm, fan state will show on the display, press the
MENU
button to exit.
Firmware Version
Select
Firmware Version
, press the
ENTER
button to confirm, firmware version will show on the
display, press the
MENU
button back to exit.
15F