ACME Audio Visual
Shop 9, 575 Canning Highway
ALFRED COVE WA 6154
www.acmeonline.com.au
P: 08 93176688
Page 1 of 7
Setting Up the Topfield 3200 Satellite Decoder
Assumptions:
1.
The satellite dish and its associated infrastructure is installed and
correctly aligned to the satellite.
2.
The Optus Aurora Service is being scanned.
3.
The LNBF used is a 10700.
4.
The satellite decoder is new or has been set to factory defaults.
These procedures can be used as a basis for many other satellite service scans.
It will also show you how to change the LNBF setting on your decoder if the
LNBF changes.
Conventions and Abbreviations used in the document:
•
RCU = Remote Control Unit
•
Actual RCU Button’s are displayed in BOLD, CAPATILISED, and Italics;
i.e.
“press the MENU button” becomes “press
MENU”
•
On-screen displayed options are CAPATILISED and in Italics.
Let’s Get Started
Connect the decoder and switch it on.
Press the Menu Button on the Remote Control Unit.
Move the yellow highlight bar to INSTALLATION, press
OK
The LNB Setting is highlighted
