XP-5R Beam
-
19
-
Display Setting
Enter menu mode, select
Display Setting
, press ENTER button to confirm, use UP
and DOWN button to select
Display Inverse, Backlight Auto Off, Backlight Intensity
or
Temperature unit.
Display Inverse
Select
Display Inverse
, press ENTER button to confirm, present mode will blink on the
display, use UP and DOWN button to select
No
(normal display) or
Yes
(inverse
display), press ENTER button to store. Press MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
Backlight Auto Off
Select
Backlight Auto Off
, press ENTER button to confirm, present mode will blink on
the display, use UP and DOWN button to select
No
(display always on) or
Yes
(display
goes off one minute after exiting menu mode), press ENTER button to store. Press
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Backlight Intensity
Select
Backlight Intensity
, press ENTER button to confirm, present mode will blink on
the display, use UP and DOWN button to adjust backlight intensity from
1
(dark) to
10
(bright), press ENTER button to store. Press MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
Temperature Unit
Select
Temperature Unit
, press ENTER button to confirm, present mode will blink on
the display, use UP and DOWN button to select
℃
or
℉
, press ENTER button to store.
Press MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
Fixture
Enter menu mode, select
Fixture Test
, press ENTER button to confirm, use UP and
20-
DOWN button to select
Auto Test
or
Manual Test
Auto Test
Select
Auto Test
, press ENTER button to confirm, the unit will run built-in programs to
automatically test pan, tilt, color, gobo, gobo rotation, shutter, dimmer, prism, prism
rotation, frost, focus,
and lamp on/off. . Press MENU button back to the last menu or
exit menu mode after auto test.
Manual Test
Select
Manual Test
, press ENTER button to confirm, the present channel will show on
the display, use Up and DOWN button to select channel, press ENTER button to
confirm, then use UP and DOWN button to adjust the value, press ENTER button to
store, the fixture will run as the channel value indicates. Press MENU button back to the
last menu or exit menu mode let the unit idle one minute.
(All channels value will become 0 after exiting Manual Test menu)
Fixture Information
Enter menu mode, select
Fixture Information
, press ENTER button to confirm, use
UP and DOWN button to select
Fixture Use Time, Lamp On Time
or
Firmware
Version.
Fixture Use Time
Select
Fixture Use Time
, press ENTER button to confirm, fixture use time will show on
the display, press MENU button to exit.
Lamp On Time
Select
Lamp On Time
, press ENTER button to confirm, lamp on time will show on the
display, press ENTER button to confirm, use UP and DOWN button to select
Exit
or
Reset Time
, press ENTER button to confirm. Press MENU button back to the last
menu or exit menu mode let the unit idle one minute.
www.bluelight.at
www.bluelight.at
