FPC 8084 User s Manual
Typematic Rate (Chars/Sec)
This option refers to the number of characters the keyboard can type per
second.
The default value is
6
.
6
6 characters per second
8
8 characters per second
10
10 characters per second
12
12 characters per second
15
15 characters per second
20
20 characters per second
24
24 characters per second
30
30 characters per second
Typematic Delay (Msec)
This option sets the display time interval from the first to the second
character when holding a key.
The default value is
250
.
Security Option
250
250 msec
500
500 msec
750
750 msec
1000
1000 msec
This item limits the access to the system and Setup, or just to Setup.
The default value is
Setup
.
System
The s ystem will not boot and access to Setup will be denied if th ein
correct pass word is entered at the prompt.
Setup
The s ystem will boot, but access to Setup will be denied if the
correct pass word is not entered at the prompt.
NOTE:
To disable security, select PASSWORD SETTING at
Main Menu and then password is asked to enter. Do
not type anything, just press <Enter> and it will
disable security. Once the security is disabled, the
system will boot and you can enter Setup freely.
OS Select for DRAM > 64MB
This segment is specifically created for OS/2 when DRAM is larger than
64MB. If the operating system is OS/2 and DRAM used is larger the
64MB,
“
OS 2
”
has to be selected; otherwise (under non-OS2), default is
“
NON-OS2
”
.
44
Summary of Contents for FPC 8084
