Rev. NOV-03
FAQ Sun Server
n
Sun Server are using resolution at 1152 x 900 x 76Hz
n
Supported resolution mode
n
640 x 480 x 70/75Hz
n
800 x 600 x 70/75Hz
n
1024 x 768 x 70/75Hz
n
1280 x 1024 x 75Hz (17 LCD)
n
Note the Max. frequency of 13.3 is 70Hz
n
You need to change the Sun Server resolution before you connect to LCD
Display
n
Please do the following procedure to change the resolution setting :
1. as root:
you may find the following comment /user/sbin/m64config
2. Type /user/sbin/m64config prconf
to view current resolution
3. Type /user/sbin/m64config res 1024x768x70 now
to change to 1024x768 @ 70MHZ
4. the screen will be rubbish
5. Then type pkill Xsun
6. And Type pkill Xsession to restart the Xsession
Remember this process need to RESTART the server
n
Under Common Desktop Environment (CDE)
n
To change the OpenBoot resolution, you can type the following commend in OK
prompt
1. In OK prompt, type setenv output-device screen:r1024x768x70
2. Type printenv to confirm the resolution has been changed to 1024x768x70Hz
3. Then type reset to restart the system
Remember this process need to RESTART the serve
r
Summary of Contents for KD 81516
Page 1: ...Rev NOV 03 Model KD 81516 User Manual...
Page 5: ...Rev NOV 03 LCD Session...
Page 14: ...Rev NOV 03 KVM Session...
